Rear Door Fixed Glass and Glass Run

Rear Door Fixed Glass And Glass Run

Parts Location:

Removal

1. Disconnect the battery ground cable.
2. Remove door trim panel.
3. Remove waterproof sheet.
4. Remove glass.
5. Remove glass run.
- Pull the glass run (1) out from the door frame.







6. Remove sash division (2).







7. Remove door fixed glass.

Installation

To install, follow the removal steps in the reverse order, noting the following points.
1. Apply soap and water to the fixed glass.
2. Apply soap and water to the door groove and insert the glass run (3) to the frame from the corner in the arrow-marked directions.
3. Be sure to install the glass run with its end pointed to the inside of the vehicle.