Control Module HVAC: Service and Repair

Automatic Heater/Air Conditioner Control Unit:

Removal / Automatic Heater/Air Conditioner Control Unit
1. Disconnect the battery ground cable
2. Remove the instrument panel driver lower cover
3. Remove the lower cluster.
4. Remove the meter cluster.
5. Remover the instrument panel lower center cover.
6. Disconnect the automatic heater/air conditioner control unit connector.
- Remove the control unit fixing screws, pull out the control unit and disconnect the connectors.
7. Remove the automatic heater/air conditioner control unit.

Installation
To install, follow the removal steps in reverse order.