With Tech 2 Scan Tool

From 98 MY, Isuzu dealer service departments are recommended to use Tech 2. Please refer to Tech 2 scan tool user guide.

Getting Started
Before operating the Isuzu PCMCIA card with the Tech2, the following steps must be performed:
^ The Isuzu98 System PCMCIA card (1) inserts into the Tech2 (4).
^ Connect the SAE16/19 adapter (2) to the DLC cable (4).
^ Connect the DLC cable to the Tech2 (4)
^ Make sure the vehicle ignition is off.





^ Connect the Tech2 SAE16/19 adapter to the vehicle DLC connector.
^ Turn the ignition on.
^ Power up the Tech2.





^ Verify the Tech2 power up display.

Operating Procedure









The power up screen is displayed when you power up the tester with the Isuzu systems PCMCIA card. Follow the operating procedure.