Control Module HVAC: Service and Repair

Automatic Heater/Air Conditioner Control Unit






REMOVAL
1. Disconnect the battery ground cable
2. Remove the instrument panel driver lower cover
3. Remove the lower cluster.
4. Remove the meter cluster.

5. Remover the instrument panel lower center cover.
- Refer to Instrument Panel Assembly in Body and Accessories.

6. Disconnect the automatic heater/air conditioner control unit connector.
- Remove the control unit fixing screws, pull out the control unit and disconnect the connectors.

7. Remove the automatic heater/air conditioner control unit.

INSTALLATION
To install, follow the removal steps in reverse order.