3-4 Accumulator Piston

3-4 Accumulator Piston





Disassembled View

Disassembly





1. Install the J-38559- A cover compressor on adapter case.
- Compress piston cover then remove snap ring.
2. Install the J-41096 cover remover and J-38584 adapter to center hole of cover.
- Use the J-23907 slide hammer to remove cover.





3. Remove spring and piston assembly.

Inspection and Repair
Visual Check:
If any damage, deformation or wear is found, replace the damaged part.

Reassembly
1. Place the J-38553 piston fitter into adaptor case and push the piston into position, using suitable diameter tube.
- Remove the piston fitter.





2. Install spring and cover.





3. Install snap ring, using the J-38559-A compressor tool.
- Install snap ring in groove.
- Remove the compressor tool.