Knee Bolster Replacement

Knee Bolster Replacement

Removal Procedure

1. Remove the left closeout/insulator panel.
2. Remove the knee bolster trim panel.




3. Remove the 4 knee bolster retaining nuts.
4. Remove the knee bolster from the steering column support bracket.

Installation Procedure




1. Install the knee bolster to the steering column support bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 4 knee bolster retaining nuts.

Tighten the nuts to 10 N.m (88 lb in).

3. Install the knee bolster trim panel.
4. Install the left closeout/insulator panel.