Low and Reverse Clutch Piston Removal

Low and Reverse Clutch Piston Removal

Tools Required
^ J23327-1 Clutch Spring Compressor
^ J34627 Snap Ring Remover and Installer
^ J42628 Disc





1. Install the J23327-1 and the J42628.





2. Tighten the J23327-1.
3. Remove the low and reverse clutch retainer ring (693) using the J34627.
4. Remove the low and reverse clutch spring assembly (694).





5. Blow compressed air into the case passage to remove the low and reverse clutch piston (695).
^ (1) LO Feed Passage
^ (2) REV Feed Passage