Crankshaft Position Sensor: Service and Repair

Crankshaft Position (CKP) Sensor Replacement

Removal Procedure

Important: Perform the CKP System Variation Learn Procedure whenever the crankshaft position (CKP) sensor is removed or replaced.
CKP System Variation Learn Procedure


1. Remove the starter.







2. Disconnect the CKP sensor electrical connector.
3. Clean the area around the CKP sensor before removal in order to avoid debris from entering the engine.
4. Remove the CKP sensor bolt.







5. Remove the CKP sensor.


Installation Procedure
1. Install the CKP sensor.







2. Install the CKP sensor bolt.

Tighten the bolt to 2..........................5 N.m (18 lb ft).

3. Connect the CKP sensor electrical connector.







4. Install the starter.