Generator Replacement

Generator Replacement

Removal Procedure
1. Disconnect the battery negative cable.
2. Remove the drive belt.




3. Disconnect the battery positive cable nut (1) on the generator.




4. Remove the A/C line mounting bracket bolt at the engine life hook.




5. Remove the right engine lift hook bolts and remove the lift hook.




6. Remove the 3 generator mounting bolts and remove the generator.

Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Install the generator and secure the generator with 3 bolts.

Tighten:
Tighten the generator bolts to 50 Nm (37 lb ft).




2. Connect the battery positive cable to the generator and secure the positive cable with the nut.

Tighten:
Tighten the generator positive cable nut to 9 Nm (80 lb in).




3. Install the engine lift hook and secure the lift hook with 2 bolts.

Tighten:
Tighten the bolts to 50 Nm (37 lb ft).

4. Install the A/C line bracket to the lift hook and secure the bracket with the bolt.

Tighten:
Tighten the A/C line bracket bolt to 10 Nm (89 lb in).

5. Install the drive belt.




6. Connect the battery negative cable.