Reaction Carrier Shaft Replacement
Reaction Carrier Shaft ReplacementRemoval Procedure
Tools Required
^ J23907 Universal Remover with Bearing Adapter
^ J25019-14 Bushing Remover
^ J29369-2 Bushing and Universal Remover
^ J7004-1 Universal Remover
1. Remove the reaction carrier shaft/internal gear retainer (668) and the reaction carrier shaft (666) from the input internal gear (664).
2. Inspect the reaction carrier shaft (666) and the input internal gear (664) for the following defects:
^ Scoring
^ Cracking
^ Damaged or worn bushings
^ A cracked shaft
^ A damaged spline
^ Damaged gear teeth
3. Using J29369-2 with J23907, remove the reaction carrier shaft front bushing (665).
4. Using J25019-14 with J7004-1, remove the reaction carrier shaft rear bushing (667).
Installation Procedure
Tools Required
^ J34196-B Transmission Bushing Service Set
^ J8092 Driver Handle
1. Using J34196-3 which is part of kit J34196-B with J8092, install a new reaction carrier shaft front bushing (665).
2. Using J34196-3 which is part of kit J34196-B with J8092, install a reaction carrier shaft rear bushing (667).