Handle/Striker Replacement - Lift Gate Window
Handle/Striker Replacement - Lift Gate WindowRemoval Procedure
1. Open the lift gate window.
2. Remove the nuts retaining the striker assembly to the lift gate window.
3. Remove the handle and striker assembly from the lift gate window.
Installation Procedure
1. Install the handle and striker assembly to the lift gate window.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the nuts retaining the striker assembly to the lift gate window.
Tighten: Tighten the nuts to 6 Nm (53 in lb).
3. Check the lift gate window for proper operation, adjust if necessary.