Seat Cushion Cover and Pad Replacement - Rear No. 2

Seat Cushion Cover and Pad Replacement - Rear No. 2

Removal Procedure




1. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).
2. Remove the rear seat cushion assembly.




3. Remove the pull handle assembly (1).
4. Remove the J-strips (2) securing the rear seat cushion cover to the seat cushion panel.
5. Remove the seat cushion panel from the pad and cover.




6. Remove the hog rings (1) from the seat cover.




7. Carefully separate the hook and loop fastener strips (2) holding the cover to the pad.
8. Remove the hog rings (1).

Installation Procedure




1. Install the hog rings (1) securing the seat cover to the pad.
2. Pull the cover over the pad pressing the hook and loop fastener strips (2) together.




3. Install the cover flaps to the pad with hog rings (1).




4. Install the seat cushion panel on the pad and cover.
5. Install the J-strips (2) securing the seat cushion cover to the seat cushion panel.
6. Install the pull handle assembly (1).





Notice: Refer to Fastener Notice in Service Precautions.

7. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two bolts (2).

Tighten the seat cushion bolts to 11 N.m (97 lb in).