Seat Latch: Service and Repair

Seat Back Latch Replacement - Rear

Removal Procedure

1. Remove the rear bench seat cushion from the vehicle.
2. Remove the seat back cover and pad.




3. Remove the 2 screws (2) securing the latch release strap bracket (1) to the seat back frame.




4. Remove the 4 screws (2) securing the latch assembly (1) to the seat back frame.
5. Remove the seat back latch from the seat back frame.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Remove the seat back latch (1) to the seat back frame with the 4 screws (2).

Tighten the rear bench seat back latch mounting screws to 12 N.m (9 lb ft).




2. Install the 2 screws (2) securing the latch release strap bracket (1) to the seat back frame.

Tighten the rear bench seat back latch release strap bracket screws to 1.5 N.m (13 lb in).

3. Install the screw securing the side trim covers to the seat cushion frame.

Tighten the rear bench seat side trim cover screw to 1.5 N.m (13 lb in).

4. Install the seat back cover and pad.
5. Install the rear bench seat cushion in the vehicle.