Daytime Running Lamp: Description and Operation

DAYTIME RUNNING LAMPS (DRL)

The ambient light sensor is a light sensitive transistor that varies its voltage signal to the body control module (BCM) in response to changes to the outside (ambient) light level. When the BCM receives this signal, it will either turn ON the daytime running lamps (DRL) or the headlamps for auto headlamp operation. Any function or condition that turns ON the headlights will cancel the DRL operation. With the headlight switch in the AUTO position, the headlights will either be turned ON or OFF, after an approximate 8 second delay depending on whether daylight or low light conditions are sensed. When the ambient light sensor signals the BCM for DRL operation in daylight conditions, the BCM illuminates the front turn signal lamp bulbs at a constant rate. The DRL will operate when the ignition switch is in the RUN position, the headlamp and panel dimmer switch is in the AUTO position, the gear selector is not in the PARK position, and the parking brake is released. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate.

DRL operation can be temporarily disabled by momentarily placing the headlamp switch in the OFF position. This will cancel DRL operation until the switch is momentarily placed in the OFF position again or until the next ignition key cycle occurs. Canadian requirements prohibit disabling DRL operation therefore the Canadian export vehicles are not equipped with the DRL defeat feature.