3. Transfer Case Housings Cleaning and Inspection

Transfer Case Housings Cleaning and Inspection





1. Clean all case/housings in solvent.
2. Remove all sealant material from the sealing surfaces.
3. Inspect for the following:
^ Damaged gasket sealing surfaces (1)
^ Worn, scored, or loose bearing races or worn bearing race bores (2)
^ Damaged bolt threads (3)
^ Damaged oil seal bores (4)
^ A loose, damaged, or restricted vent tube (5)
^ Damaged speed sensor bore (6)
^ Porosity
^ Damage to the exterior of the case/housings