Lumbar Replacement - Front Seat

Lumbar Replacement - Front Seat

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the seat back cover and pad.
3. Remove the seat back panel.
4. Disconnect the electrical connector from the lumbar motor.




5. Detach the seat back frame wire (1) from the top of the lumbar (2).
6. Detach the seat back frame wire from the bottom of the lumbar.




7. Drill out and remove the 2 lumbar motor mounting rivets (3).
8. Remove the lumbar assembly (1) from the seat.

Installation Procedure




1. Position the lumbar assembly (1) onto the seat.
2. Install the lumbar motor to the seat frame with 2 new rivets (3).




3. Attach the top and bottom of the lumbar (2) onto the seat back frame wire (1).
4. Connect the electrical connector to the lumbar motor.
5. Install the seat back panel.
6. Install the seat back pad and cover.
7. Install the seat in the vehicle.