Front Suspension
Stabilizer Shaft ReplacementRemoval Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the nuts from the link assemblies.
3. Remove the link assemblies.
4. Remove the insulator clamp bolts.
5. Remove the clamps.
6. Remove the stabilizer shaft.
7. Remove the insulators.
8. Inspect all of the parts for wear and damage.
Installation Procedure
1. Install the insulators to the stabilizer shaft.
2. Install the stabilizer shaft.
3. Install the clamps over the insulators and the stabilizer shaft.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install insulator clamp bolts.
^ Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Support the lower control arms at curb height.
6. Install the link assemblies.
7. Install the nuts to the link assemblies.
^ Tighten the nut to 44 Nm (32 ft. lbs.).
8. Lower the vehicle.