Rear Door Window Glass: Service and Repair

Window Replacement - Rear Door

Removal Procedure

1. Position the rear door window in the full up position.
2. Remove the rear door trim panel.
3. Remove the rear inside door handle.
4. Remove the rear door speaker.
5. Remove the rear door water deflector.
6. Remove the rear window run channel.
7. Lower the rear door window in the full down position.




8. Remove the bolts retaining the rear door window to the window regulator.
9. Lift the rear window off the regulator. Carefully lower the window down into the door.




10. Remove the window from the door by sliding the window out between the inner panel (1) and the upper window channel (2).

Installation Procedure




1. Install the rear door window to the rear door by inserting the front edge of the window into the window channel (3), and sliding the rear of the window down between the upper window channel (2) and the inner panel (1).




2. Position the rear door window onto the window regulator.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts retaining the rear door window to the window regulator.

Tighten the rear window bolts to 9 N.m (80 lb in).

4. Raise the window to the full up position.
5. Install the rear door window run channel.
6. Install the rear door water deflector.
7. Install the rear door speaker.
8. Install the rear door inside handle.
9. Install the rear door trim panel.