Transfer Case Front Output Shaft Speed Sensor Replacement

Transfer Case Front Output Shaft Speed Sensor Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.




2. Remove the transfer case front speed sensor electrical connector.




3. Remove the transfer case front speed sensor.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the transfer case front speed sensor.

Tighten the sensor to 17 N.m (13 lb ft).




2. Install the transfer case front speed sensor electrical connector.
3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.