Rear Bumper Replacement (Canyon/Colorado)

Rear Bumper Replacement (Canyon/Colorado)


Removal Procedure

1.Remove the license plate lamp harness.





2.Remove the bumper bracket to frame bolts.

3.Remove the bumper.

4.Remove the bracket to bumper bolts.

Installation Procedure





1.Install the bumper brackets to the bumper.

Notice:Refer to Fastener Notice .

2.Install the bumper bracket to bumper bolts.

TightenTighten the bracket to bumper bolts to 160 N �m (118 lb ft).

3.Install the bumper to the vehicle.

4.Install the bumper bracket to frame bolts.

TightenTighten the bumper to frame bolts to 160 N �m (118 lb ft).