Tail Lamp: Service and Repair

TAIL LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Open the tailgate.
2. Remove the screws from the tail lamp assembly.
3. Remove the lamp assembly.




4. Remove the tail lamp and backup lamp sockets, depressing the locking tab and rotating counterclockwise.

INSTALLATION PROCEDURE




1. Install the tail lamp and/or backup lamp sockets to the tail lamp, rotating clockwise until the locking tab is fully seated.




2. Press the tail lamp to the rear body panel until fully seated.

3. NOTE: Refer to Fastener Notice.

Install the tail lamp screws to the tail lamp.

Tighten the tail lamp screws to 3 N.m (26 lb in).

4. Close the tailgate.