Power Steering Pump Replacement

Power Steering Pump Replacement

Removal Procedure

1. Remove the air cleaner assembly.
2. Remove the drive belt.
3. Remove the power steering pump pulley.
4. Disconnect the oil pressure sensor harness clip from the pump body.
5. Install a drain pan under the vehicle.




6. Disconnect the power steering pressure hoses from the power steering pump.




7. Remove the power steering pump mounting bolts.
8. Remove the power steering pump.

Installation Procedure




1. Install the power steering pump.

Notice: Refer to Fastener Notice.

2. Install the power steering pump mounting bolts.

Tighten the power steering pump mounting bolts to 25 N.m (18 lb ft).




3. Connect the power steering pressure hoses to the power steering pump.

Tighten the power steering pressure hose to 25 N.m (18 lb ft).

4. Remove the drain pan from under the vehicle.
5. Connect the oil pressure sensor harness clip to the pump body.
6. Install the power steering pump pulley.
7. Install the drive belt.
8. Install the air cleaner assembly.
9. Bleed the power steering system. Refer to Power Steering System Bleeding.
10. Inspect the power steering system for leaks.