Seat Switch Replacement - Power

SEAT SWITCH REPLACEMENT - POWER

REMOVAL PROCEDURE
1. Remove the seat cushion outer trim panel.
2. Remove the switch bezel from the seat assembly.
3. Remove the buttons from the switch (2).




4. Release the tabs (1) that retain the seat switch (2) to the seat bezel.




5. Disconnect the power seat switch harness (1) from the seat harness.
6. Remove the power seat switch from the seat bezel.

INSTALLATION PROCEDURE




1. Connect the power seat switch harness (1) to the seat harness.




2. Install the power seat switch (2) to the seat bezel. Verify that the retaining tabs (1) are fully seated.
3. Install the buttons on the switch.
4. Install the switch bezel assembly to the seat assembly.
5. Install the seat cushion outer trim panel.