Engine Flywheel Replacement (RPO MA5)

Engine Flywheel Replacement (RPO MA5)

Tools Required

J 45059 Angle Meter

Removal Procedure




1. Remove the clutch assembly.
2. Remove and discard the flywheel bolts.
3. Remove the flywheel.

Installation Procedure




1. Position the flywheel to the crankshaft

Notice: Refer to Fastener Notice.

2. Install the new flywheel bolts.

Tighten the flywheel bolts to 25 N.m (18 lb ft) plus an additional 50 degrees using the J 45059.

3. Install the clutch assembly.