Wiper Motor: Service and Repair
I-MARK EXC. FWD1. Disconnect battery ground cable.
2. Working from under instrument panel, remove nut and crankarm from motor.
3. Disconnect wire connectors.
4. Remove three nuts securing motor and remove.
5. Reverse procedure to install.
I-MARK W/FWD
1. Disconnect battery ground cable.
2. Remove wiper arm locknuts, then wiper arms.
3. Working from under the hood, remove wiper motor attaching bolts.
4. Disconnect wiper motor linkage from wiper motor, then motor.
5. Reverse procedure to install.