A/T - Assembly Procedures Updated
87isuzu2BULLETIN NUMBER ISSUE DATE GROUP
SB87-05-005 August 14, 1987 TRANSMISSION
I-MARK (JT) AUTOMATIC TRANSAXLE ASSEMBLY (WORKSHOP MANUAL CORRECTION)
VEHICLES AFFECTED
1987 I-Mark (JT) models with automatic transaxle.
SERVICE INFORMATION
The installation of the dished plate during automatic transaxle assembly is incorrectly specified in the following manual:
Manual Page No.
1987 I-MARK (JT) 05B-43
(Publication No. AIMI-SVC-145, part No. 2-90999-107-7)
SERVICE PROCEDURE
Make the following pen-and-ink change on the appropriate page of the referenced Workshop Manual:
CONVEX
v2. Install the dished plate with the convex side facing the piston. Install the clutch discs in the clutch hub. The first disc installed on the dished plate is steel. Install the retaining plate onto the clutch disc with smooth side down.