Seat Belt Extender Program Procedure

When a dealer receives a customer request for a seat belt extender, it is the dealer's responsibility to do the following:

Fill out a "Seat Belt Extender" order form which lists:

1. Dealer Code, Dealer Name and Address.

2. Applicant (customers) Name and Address.

3. Vehicle Information (V.I.N.)

4. Measurement Procedures

5. Model/Part Number Information off of original seat belt.

6. Caution Information pertaining to the use of the extender (applicant's signature and date required)

7. Submit (by mail) the white copy of the seat belt extender form to:

American Isuzu Parts Distribution Network
Attn:Parts Technical Expediter/QC Building
2300 Pellissier Place
Whittier, Ca 90601

AIPDN'S Responsibility:

Upon receipt of the "Seat Belt Extender Order Form" from a dealer, AIPDN (Parts Technical Operation Dept.) implements the following procedures:

1. Review the form to ensure that it is filled out properly.

2. Pull the applicable seat belt extender from inventory and fill in the seat belt location, Vehicle V.I.N. and owners name on the white tag which is affixed to the seat belt extender.

3. The seat belt extender will be given to the PDC and an order will be submitted for the dealer based on the information listed on the S/B Extender form. The S/B extender number (located in the upper right hand corner of the form) will be used as the dealer order number.

4. The "white copy" of the dealers seat belt extender form will be retained in the Parts Technical Operation Dept. At AIPDN (Whittier Ca. Office).