Removal

MAJOR COMPONENTS

IMPORTANT OPERATIONS
1. Timing belt
2. Tension pulley and tension spring
(1) Remove the tension spring.




(2) Loosen bolt (B), draw the tension pulley fully to the water pump side.
(3) Remove the timing belt.
(4) Remove the tension pulley.
(5) Remove the crank timing pulley and guide plate.

3. Camshaft timing pulley




Apply a detention to the pulley by putting a T-bar wrench or other proper tool over the front-plate fitting bolt, and loosen the pulley fitting bolt.

Note: The timing belt must be off (removed from) the camshaft timing pulley during both removal and installation of the camshaft timing pulley.




4. Oil pump and pulley
Apply a detent with an inner hex, and loosen the oil pump pulley bolt and remove the pulley.

Wrench inner hex = 6 mm