Door Trim Panel - Rattling Noise
BULLETIN NUMBERSB91-11-011
ISSUE DATE
October 24, 1991
GROUP
BODY
IMPULSE (JI) DOOR RATTLING
(This Service Bulletin supercedes SB91-11-004, to correct Flat Rate Manual information)
AFFECTED VEHICLES
1990-91 Impulse (JI) models.
SERVICE INFORMATION
A rattling noise coming from the door during driving may be caused by a loose door trim pad. Replacing the door trim pad clips will secure the trim pad and eliminate the noise.
SERVICE PROCEDURE
Replace the door trim pad clips as follows (Figure 1):
1. Remove die door trim pad and trim pad clips, as described in the appropriate Workshop Manual.
2. Replace the trim pad clips.
3. Reinstall the door trim pad as described in the appropriate Workshop Manual.
PARTS INFORMATION
Part No. Description
8-97022-017-0 Door Trim Pad Clip
NOTE
Eight (8) clips are required to repair one door.
FLAT RATE MANUAL UPDATE INFORMATION