Turn Signals: Description and Operation

TURN OPERATION
With the ignition switch in ON or START, battery voltage is applied to the turn/hazard switch from fuse 12. When the turn/hazard switch is in the TURN position, battery voltage is applied to the flasher unit. Its output is pulsing voltage which is directed to either the RIGHT or LEFT position in the turn switch and causes the turn lights and turn indicator lights to flash in either direction.

HAZARD OPERATION
Battery voltage is applied to the turn/hazard switch at all times from fuse 20. When the turn/hazard switch is in the hazard position, battery voltage is applied to the flasher unit. Its output is pulsing voltage which is directed to the hazard switches and causes the turn lights and turn indicator lights to flash in both directions.