Paint - Color Codes and Cross References

BULLETIN NUMBER
SB92-11-010

ISSUE DATE
August 13, 1992

GROUP
BODY

1993 PAINT COLORS AND CODES

VEHICLES AFFECTED

All 1993 Isuzu passenger cars and trucks.

SERVICE INFORMATION

This Service Bulletin contains paint codes for 1993 Isuzu vehicle colors. Refer to Service Bulletin SB90-11-007 for paint codes for 1986-1991 vehicle colors; refer to SB91-11-005 for 1992 paint codes.

In Chart 1, the option codes and colors are listed by vehicle model, with a reference to paint code. The paint code is used in Chart 2 to identify the aftermarket paint vendor code.

On the vehicle, the option code is printed on the Service ID Plate, located under the hood, on the bulkhead at the rear of the engine compartment.

All aftermarket paint cross-reference information has been supplied by the paint manufacturers. In many cases, the aftermarket manufacturer's color name differs from the Isuzu color name listed in this Service Bulletin.

The last column in Chart 2 indicates whether or not the paint should be clear-coated. If a 2-tone vehicle uses one clear-coat color and one uncoated color, only the clear-coated color receives the clear coat.

IMPORTANT
Due to differences in manufacturing plants, be sure to specify the manufacturing plant when ordering paint. The color name is the same, but the paint formula differs between assembly plants. Check the VIN plate to verify where the vehicle was manufactured:

^ Pickups with VINs starting with JAA were manufactured in Japan.

^ Pickups and Rodeos with VINs starting with 4S1 or 4S2 were manufactured at SIA. Give this information to your paint supplier to ensure receiving the exact formula required.





CHART 1





CHART 2