Evaporator Assembly - Modifications
84jaguar01Date.....NOVEMBER, 1984
ITEM: J84/56
SUBJECT: AIR CONDITIONING EVAPORATOR
MODEL: XJ6 & XJ-S HE
A recent change in the evaporator assembly as received from the supplier requires the relocation of the evaporator/ expansion valve mounting plate on the air conditioning unit case. Units to this condition were introduced at VIN-347244, XJ6, and 108046, XJ-S. Evaporator/Expansion Valve assemblies to the latest condition are available from parts sources.
Should replacement of Evaporator/Expansion Valve assembly be required on vehicles prior to the above VINS, then the following modifications will apply.
FIGURE 1:
MODIFICATION PROCEDURE
1. Following the removal of the air conditioning assembly and the evaporator unit, carefully cut off the metal flanges. (FIG. 1-C)
FIGURE 2:
2. Mark and drill the case to the dimensions in Fig. 2.
3. Carefully remove all swarf prior to reassembly.
4. Locate new evaporator/expansion valve assembly and secure.