Lower Ball Joint Bolts - Different Thicknesses
84jaguar01March, 1984
ITEM: J84/09
SUBJECT: LOWER BALL JOINT SECURING BOLTS
MODEL: ALL
The bolts securing the lower ball pin cap to the stub axle carrier may on some vehicles be in a mixed condition, i.e. the head of the bolts are of different thicknesses - 0.3125" and 0.1875".
The bolts with a head thickness of 0.3125" are fitted on production to the inboard holes of the lower ball pin cap.
It is important that if any of these bolts are removed during service, they should be replaced in the correct position. (See Diagram)