Passenger's Underscuttle Casing

Removing





- Open glovebox (1, Fig. 47).

- Remove two screws (2, Fig. 47) located adjacent to glovebox lid hinges securing underscuttle casing to fascia.

- Remove two screws (3, Fig. 47) securing casing and quarter panel to fascia support bracket. Manoeuvre underscuttle casing (4. Fig. 47) past footwell fresh air control, lift casing from car.

- Remove quarter panel (5. Fig. 47) from car.

Refitting

- Refit quarter panel.

- Manoeuvre underscuttle casing past fresh air control and. secure casing to fascia support with two screws.

- Refit screws adjacent to glovebox hinges; close glovebox lid