Wiper Motor: Service and Repair
Remove and Refit1. Remove the battery.
2. Remove the wiper arms and blades from the spindles.
3. Remove the hood cable bracket nuts and bolts.
4. Remove the wiper motor cover.
Wiper Motor:
5. Disconnect the cable rack conduit from the motor (1).
6. Remove the two retaining nuts and washers from the motor clamp (2).
7. Tilt the motor towards the engine and with draw the cable connectors.
8. Remove the motor and drive as a complete assembly, drawing the rack drive from the conduit.
9. When refitting, insert the rack into the conduit. It may be necessary to turn the wheel box spindles to enable the rack to be pushed right home.