V12 Ignition Amplifier - Rationalization of Availability

85jaguar01 DATE . . . FEBRUARY, 1985

NUMBER . . . J85/18
MODEL: XJ-S

SUBJECT: IGNITION AMPLIFIERS

MODEL AB3
KEY POINTS

RATIONALIZATION OF
V12 IGNITION AMPLIFIER AVAILABILITY
In order to rationalize the many part numbers for the Jaguar V12 ignition amplifier, one part, JLM 368, will now be used to cover the previous part numbers.

FIGURE 1 - CONNECTIONS FOR REPLACING AMPLIFIERS PART NOS. (48012), (48018) and (48019) C34781 C39955 DAC1371:

As you will see on the attached application list, the amplifier will be supplied separately as well as in Kit AEU 1373, together with a loose ballast resistor molding and lead assembly (supplied with the amplifier) for the 9BR amplifier lead and should it be needed, a 6.8K ohm resistor, as shown in Fig. 1.

FIGURE 2 - CONNECTIONS FOR REPLACING AMPLIFIERPART NO. (48025) DAC 2535:

Please take note of the different wiring connections needed for each application (Figures 1 or 2). Fitting instructions will be included with the amplifier.



JAGUAR IGNITION AMPLIFIER MODEL AB3