Driver's Underscuttle Casing

Removing





- Disconnect the battery.

- Unscrew locking ring (1. Fig. 48) securing speedometer trip to underscuttle casing. Remove two screws (2, Fig. 48) securing casing and quarter panel to fascia support bracket.

- Lower top of casing sufficient to allow access to rheostat.

- Noting fitted position, detach leads from rheostat (3, Fig. 48).

- Withdraw underscuttle casing (4, Fig. 48) and quarter panel from car.

Refitting

- Place casing and quarter panel in car, feed speedometer trip through panel.

- Reconnect the rheostat.

- Secure casing and quarter panel with two screws.

- Refit locking ring to secure speedometer trip cable to casing.

- Reconnect the battery and check rheostat for correct operation.