Remove and Refit

REMOVE
- Remove the oil pan





Figure 32

- Detach the suction and delivery pipe clips (1, Fig 32) from the brackets.
- Knock back the tabs and remove the setscrews (2, Fig 32) securing the delivery pipe.
- Pull both pipes from the oil pump.
- Knock back the tabs and remove the setscrews (3, Fig 32) securing the oil pump.
- Recover the pipe bracket and drive coupling (4, Fig 32).

REFIT
- Check the condition of the O-ring seals and, if necessary, fit new ones.
- Locate the drive coupling on the oil pump and secure the pump using three setscrews, tabwasher and pipe bracket.
- Turn up the tabs.
- Fit the delivery pipe on a new gasket, turn up the tabs.
- Locate the suction pipe and secure the clips to the brackets.
- Ensure that the pipe intake is on the center line of the engine.
- Refit the oil pan.