Center Console - Rattling and Vibrating
88jaguar01BODY RATTLES
SECTION: 76
No: 12
Model: XJ6 3.6 Date: JANUARY, 1988
KEY POINTS: INTRODUCTION OF FOAM PADS CENTER CONSOLE
To eliminate a problem of harness connectors rattling/vibrating against the underside of the center console finisher a modification was introduced from VIN 525078. This modification called for foam pads to be added to the finisher at the locations indicated in the illustration.
For vehicles subject to rattles in this location, built prior to the identification, the following procedure should be carried out:
1. Remove the center console finisher.
2. Apply self adhesive expandable foam at the locations indicated one section 6-1/2" and one section 2-5/32".
NOTE: Expandable foam should be ordered quoting Part No. BBC 4861/1. This strip of foam is approximately 4" long and will modify at least three vehicles.
3. Replace the center console finisher and road test for rattles.
Repair Operation Number and Time: 76.91.15 0.30 hours
Fault Code: 8RLR
CAUTION: Part Numbers included in Service Bulletins are for reference only and should always be cross referenced with the latest parts information.