Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • Engine - Poor Running in Wet or Hot Weather Conditions
  • VCM - Displays Fuel Failure Symbol
  • Fuel Pump - Intermittent Operation, No Start
  • Engine Performance - Hesitation, Misfire/Inaccurate Tach
• By Symptom
  • Abnormal wear/deterioration
    • Engine Performance - Hesitation, Misfire/Inaccurate Tach
  • Customer Interest
    • Engine - Poor Running in Wet or Hot Weather Conditions
    • VCM - Displays Fuel Failure Symbol
    • Fuel Pump - Intermittent Operation, No Start
    • Engine Performance - Hesitation, Misfire/Inaccurate Tach
  • Erratic Operation
    • Fuel Pump - Intermittent Operation, No Start
  • False instrument warning light/gauges
    • ECU - Revised to End False Fueling Failure Illumination
  • Inoperative
    • Engine - Base Idle Setting Procedure
    • Fuel Pump - Intermittent Operation, No Start
  • Poor performance
    • Engine - Poor Running in Wet or Hot Weather Conditions
  • Starting problems
    • Fuel Pump - Intermittent Operation, No Start
• All Technical Service Bulletins
  • Engine - Poor Running in Wet or Hot Weather Conditions
  • Electrical Relays - Locations
  • VCM - Feedback Fueling Fault Code Changes
  • ECU - Revised to End False Fueling Failure Illumination
  • JDS - Software Reference Guide
  • Tool - Fuel Injection Tester
  • Check Engine Light - Reporting and Erasing DTCs
  • JDS - Verifying Base Idle Speed Settings
  • VCM - Displays Fuel Failure Symbol
  • Engine - Base Idle Setting Procedure
  • Fuel Pump - Intermittent Operation, No Start
  • Crankshaft Sensor Gear - Defective Bolts
  • Engine Performance - Hesitation, Misfire/Inaccurate Tach
  • A/T - Gear Selector Cable/Inner Switch Setting Procedure
  • Engine Controls - Removal of Seized Oxygen (O2) Sensors