Powertrain Management: Technical Service Bulletins
- Recalls
- Customer Interest
- High Compression Engines - Pinging
- Fuel Gauge - Inaccurate Fuel Readings at Full
- Fuel Pump - Noise/Chattering/Engine Stalling
- Fuel Pump - Intermittent Operation, No Start
- Ignition - Poor Idle Quality, Intermittent Misfire
- Engine Performance - Hesitation, Misfire/Inaccurate Tach
- Dashboard Area - Knocking Noise at Idle
- Engine - Hesitation Under Acceleration or Turns
- Fuel Tank - Filler Cap Area Filled with Water
- Engine - Poor Running in Wet or Hot Weather Conditions
- Heated Breather Housing - Revised
- VCM - Displays Fuel Failure Symbol
- Engine - Stalls At Idle
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- High Compression Engines - Pinging
- Fuel Gauge - Inaccurate Fuel Readings at Full
- Fuel Pump - Noise/Chattering/Engine Stalling
- Fuel Pump - Intermittent Operation, No Start
- Ignition - Poor Idle Quality, Intermittent Misfire
- Engine Performance - Hesitation, Misfire/Inaccurate Tach
- Dashboard Area - Knocking Noise at Idle
- Engine - Hesitation Under Acceleration or Turns
- Fuel Tank - Filler Cap Area Filled with Water
- Engine - Poor Running in Wet or Hot Weather Conditions
- Heated Breather Housing - Revised
- VCM - Displays Fuel Failure Symbol
- Engine - Stalls At Idle
- Driveability
- Erratic Operation
- False instrument warning light/gauges
- Inoperative
- Noise
- Poor performance
- Recalls
- Starting problems
- Sticking/Binding
- All Technical Service Bulletins
- Electrical Relays - Locations
- VCM - Feedback Fueling Fault Code Changes
- Check Engine Light - Reporting and Erasing DTCs
- High Compression Engines - Pinging
- Fuel Gauge - Inaccurate Fuel Readings at Full
- VIN and Certification Labels - Replacement
- Engine - Base Idle Setting Procedure
- Fuel Pump - Noise/Chattering/Engine Stalling
- Fuel Pump - Intermittent Operation, No Start
- Ignition - Poor Idle Quality, Intermittent Misfire
- Ignition System - Spark Plug Corona Stain
- Tool - JD189 Distributor Body/Rotor Arm Set Position
- ECU - Revised to End False Fueling Failure Illumination
- Distributor Cap - Revised
- Crankshaft Sensor Gear - Defective Bolts
- Engine Performance - Hesitation, Misfire/Inaccurate Tach
- Dashboard Area - Knocking Noise at Idle
- Engine - Hesitation Under Acceleration or Turns
- Fuel Tank - Modification
- Fuel Filler Flap - Improved Operation
- Fuel Tank - Filler Cap Area Filled with Water
- Throttle Valve - Adjustment Guideline
- Engine - Poor Running in Wet or Hot Weather Conditions
- Heated Breather Housing - Revised
- Fuel Tank Breather System - Modified
- Catalyst - Modify Heat Shield to Eliminate Resonance
- Recall 89V168000: Excessive Fuel Vapor Pressure
- VCM - Displays Fuel Failure Symbol
- JDS - Verifying Base Idle Speed Settings
- Tool - Fuel Injection Tester
- JDS - Software Reference Guide
- Engine - Stalls At Idle
- A/T - Gear Selector Cable/Inner Switch Setting Procedure
- Fuel Injection Harness - Revised, JDS Test Changes
- Engine Controls - Removal of Seized Oxygen (O2) Sensors