Instrument Panel Housing, Renew

INSTRUMENT PANEL HOUSING

RENEW

Open the bonnet and disconnect the battery earth lead.
Open the car door.
Remove the drivers side dash liner. Service and Repair
Adjust the steering column fully rearward.
Remove the screws securing the instrument panel.
Displace the instrument panel.
Disconnect the multi-plug block connectors.

Fig 1:

Remove the instrument panel from the fascia switch pack (Fig 1)

Fig 2:

Remove the nuts/screws securing the instrument pack to the housing (1 Fig 2).
Remove the instrument pack from the housing.
Remove the captive nuts from the housing.

Fitting a new instrument housing is the reversal of the removal procedure.