System Warnings, Main & Mechanical Components Information

SYSTEM WARNINGS:

^ The VCM seat belt warning and a separate warning light located on the dashboard (below the hazard warning switch) indicate that the driver's belt is not secured in the restrained position. These lights will remain illuminated.

^ An audible warning will also sound for 6 seconds when the belt is not fully secured.

FIGURE 2:

MAIN COMPONENTS AND LOCATIONS:
Key to diagram:

1 Runner/anchor 2 Guide rail 3 Rear dock anchorage 4 Rear dock/proximity switch 5 Motor/drive assembly
A Screw, rail to body B Bolt mounting bracket and anchorage to B post C Bolt, upper mounting plate D Bolt, lower mounting plate E Dual lock fastener

FIGURE 3:

MAIN MECHANICAL COMPONENTS (Fig 3)

Item Component Location

1 Rail and seal A post and cantrail
2 Seal, rail A post and cantrail
3 Mounting bracket, rail (4 off) Cantrail
3A Tapped plate Cantrail
4 Mounting bracket, rail (4 off) A post
5 Screw, rail to body (8 off) A post and cantrail
6 Rivet, mounting rail brackets A post cantrail
(16 off)
7 Motor, cable and anchorage B-C post
8 Bolt, upper mounting plate (2 off) B-C post
9 Washer, plain (2 off) B-C post
10 Washer, lock (2 off) B-C post
11 Bolt, lower mounting plate (2 off) B-C post
12 Washer, plain (2 off) B-C post
13 Washer, lock (2 off) B-C post
14 Bracket, B post upper trim mounting B-C post
15 Mounting bracket, B post upper trim B-C post
16 Bolt, mounting bracket and anchor- B-C post
age to B post (4 off)
Passive belt reel and buckle Seat slides
Lap belt and buckle (matched pair) Seat slides