Engine Speed Sensor: Service and Repair
FLYWHEEL SENSORRENEW
Open the boot and disconnect the battery earth lead.
Open the bonnet.
Disconnect the sensor multi-plug cable connector.
Fit a draw string to the sensor lead.
Jack up the vehicle and support with axle stands.
Remove the heat shield.
Remove the sensor securing bolts and displace the sensor from its position.
Displace the lead from its retaining clips.
Withdraw the sensor and draw string downwards.
Remove the drawstring and the sensor.
Fit the new sensor to the drawstring. Pull up the sensor lead from above.
Fit the new sensor into position. Fit and tighten the securing bolts.
Secure the lead in the retaining clips.
Remove the drawstring.
Connect the sensor multi-plug.
Connect the battery earth lead.