Campaign - Excessive Fuel Vapor Pressure: Overview
91jaguar01
RECALL
No: 7 (2)
XJ-S FUEL TANK RECALL R351
GROUP 4 VEHICLES
Model: 1978-1991 XJ-S Date: FEBRUARY, 1991
KEY POINTS: RECALL INFORMATION AND REPAIR PROCEDURE
Jaguar Cars Exports Ltd. has determined that in all model variants of 1978-1991 XJ-S (excluding convertibles by Hess & Eisenhardt) the possibility exists that excessive fuel vapor pressure can develop. Pressure variations within the fuel tank which occur during normal running could weaken the structure of the fuel tank causing a fuel leak with the resultant possibility of a fire.
Any instances of fuel tank leakage discovered during the recall kit installation may be rectified following normal procedures and claimed as described under the "Warranty Information" section of this bulletin.
Affected VIN Range
1978 - 1991 XJ-S Coupe, Cabriolet, Convertible*
Overall VIN Range 54673 - 177467
*Factory convertibles only, Hess & Eisenhardt convertibles are not included in this recall campaign.
Due to changes in vehicle specification in terms of evaporative loss control, 5 different conditions exist within the overall range of vehicles that are to be recalled. The breakout of the 5 groups is as follows:
Group 1 VIN's 54673 - 105337
Group 2 VIN's 105338 - 117338
Group 3 VIN's 117339 - 133460
* Group 4 VIN's 133461 - 177467
Group 5 3.6 Liter Xi-S (25 vehicles)
Separate repair, parts, and warranty claim procedure information for each group of vehicles will be issued to you via bulletin update as it becomes available.
* Note: This bulletin issue contains repair, parts, and warranty claim procedure information for Group 4 vehicles only.
Group 4 vehicles only 133461 - 177467
You may be required to perform recall campaign work on a vehicle that was not invoiced to your dealership (i.e., transient owner, etc.).
If this occurs, normal repair procedures should be followed.
OWNER NOTIFICATION
(Group 4 Vehicles Only)
All owners on record will be issued recall notifications via first class mail cormnencing February 18, 1991. Included will also be a letter advising them of this condition. (A copy of the owner's letter is included with this mailing).
Owners will be asked to contact their selling dealer (or nearest authorized dealer) and make an appointment for repair work. They will also be asked to sign and return the "Campaign Claim" form to the dealer.
Note: A dealer should never refuse to perform, or delay, an open campaign repair on any vehicle due to the unavailability of a campaign claim form or other documentation.
PARTS INFORMATION
Note: Ensure that your Parts Manager receives a copy of this bulletin.
Evaporative loss control (ELC) kits will be shipped to you, chargeable, on an allocation basis. Initial supplies will arrive at your dealership by the recall launch date. Reimbursement will be through the normal campaign procedures. Adequate supplies of "R351" campaign completion labels are endlosed in your bulletin package.
Part Desc. Qty. Comments
JLM 10557 Main Kit 1 Group 4
JLM 10598 Supplementary Kit 1
WARRANTY INFORMATION
Complete the applicable "Campaign Claim" form (See Section I of the Warranty Manual). Insert in the "Repair Code" box on the "Campaign Claim" the appropriate repair code. Direct entry dealers should refer to their instructional guide.
Repair Code R.O Number Time Model VIN
LX 17.91.10 2.55 hrs. 4223 133461-177467
LX 17.91.11 2.55 hrs. 4232 133461-177467
LX 17.91.12 2.30 hrs. 4242 147269-177467
LX 17.91.10 2.55 hrs. 4250 163039-177467
Warranty claims for the rectification of fuel tank leaks discovered when following the workshop procedure should, for:
a. Vehicles in Warranty:
be submitted in the normal manner quoting the appropriate warranty fault code and S.R.O. numbers. or
b. Vehicles out of Warranty:
be subject to normal post warranty authority procedures. Authorized claims may be submitted quoting a complaint code 3ZAZ and appropriate S.R.O. and part numbers.
INSTALLATION
CAUTION: THE OPERATIONS AND PROCEDURES CONTAINED IN THIS BULLETIN ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS WITH KNOWLEDGE OF JAGUAR SYSTEMS. ALL NECESSARY SAFETY PRECAUTICKS MUST BE ADHERED TO WHEN CARRYING OUT INSTALLATION AND TESTING.
In addition to the modification to the purge system at the front end of the vehicle, installation of the purge kit requires modifications at the rear, details of which are found at the end of this section.