Test 10 -15

TEST 10

Right-hand side front sensor voltage
Raise car on wheel free ramp
AC volt-meter connected to terminals 29 and 47 ABS module
Ignition OFF
Spin wheel at 1 rev per second
^ Should be 0.15-0.7 volts
If incorrect check:
- sensor mounting
- toothed wheel
- vertical link

TEST 11

Right-rear sensor voltage
Raise car on wheel free ramp
Spin wheel at 1 rev per second
AC volt-meter connected to terminals 27 and 45 ABS module
Ignition OFF
^ Should be 0.04-0. 1 volts
If incorrect check:
- sensor mounting
- toothed wheel
- hub carrier


TEST 12

Left-front sensor voltage
Raise car on wheel free ramp
Spin wheel at 1 rev per second
AC volt-meter connected to terminals 30 and 85 ABS module
Ignition OFF
^ Should be 0.15-0.7 volts
If incorrect check:
- sensor mounting
- toothed wheel
- vertical link

TEST 13

Left-rear sensor cable screen continuity test
Continuity tester between terminals 6 and 1
Ignition OFF
^ Should be no continuity
- If incorrect check that sensor is not grounded
- sensor cable from sensor to module


TEST 14

Right-front sensor cable screen continuity test
Continuity tester between terminals 28 and 1
Ignition OFF
^ Should be no continuity
If incorrect:
- check that sensor is not grounded
- sensor cable from sensor to module is not grounded

TEST 15

Right-rear sensor cable screen continuity test
Continuity tester between terminals 27 and 1
Ignition OFF
^ Should be no continuity
If incorrect check:
- that sensor is not grounded
- sensor cable from sensor to module is not grounded