Test Note 3

Install and remove booster test adaptor (88 - 89 model years)

Test Gauge Connection For Booster:

INSTALL:

1. Disconnect power hydraulic feed pipe at booster.
2. Install Jaguar adaptor JAO (10 mm thread) with seal washer in booster feed port.
3. Connect feed pipe to adaptor.
4. Remove most accessible adaptor plug.
5. Connect test gauge by test point 4 (6mm thread) with seal washer.

REMOVE:

1. Switch engine OFF.
2. Depressurize system.
3. Remove test gauge and hose assembly.
4. Remove adaptor and test point.
5. Reconnect feed pipe.