Blower Assembly - Driver Side
Blower Assembly - Driver Side1. Disconnect battery ground cable and remove dash liner and console side casing.
2. Remove nuts holding bottom of fuse box mounting plate to blower assembly. Loosen nuts holding top of fuse box mounting plate.
3. Ease fuse box clear of blower assembly.
4. Disconnect pliable duct side of air conditioner, blower harness at block connector, and vacuum line from valve servo on blower.
5. Wedge open recirculation valve in base of blower assembly and remove bolts securing blower assembly to mounting brackets.
6. Ease blower assembly from position and detach the duct by removing tape.