Ambient Temperature Sensor / Switch HVAC: Service and Repair
Ambient Temperature SensorRemoval
1. Open the bonnet and disconnect the batterv earth lead.
2. Remove the right side dash liner.
3. Remove the glove box lid and glove box.
4. Remove the right hand blower motor assembly.
5. Remove the screws securing the ambient temperature sensor.
6. Disconnect the cable harness multi-plug connector.
7. Loosen the nut/bolt securing the sensor probe retaining clip to flap.
8. Displace the sensor probe from the retaining clip and remove the sensor.
Installation
- Installation is the reverse of the removal procedure.