Trip Computer: Service and Repair

TRIP COMPUTER





RENEW

Disconnect the battery earth lead.
Remove the combined interior light switch.
Remove the combined heated backlight and hazard warning switch.
Remove the computer to fascia securing bolts (1 Fig. 1) and carefully displace the computer from the veneer panel.
Disconnect the computer from the harness multiplug, then connect the new computer to the multiplug.

Fit the new computer to the veneer panel and tighten the fascia securing bolts.
Refit the combined heated backlight and hazard warning switch assembly.
Refit the combined interior light switch assembly.
Reconnect the battery earth lead.